| Sign In | Join Free | My himfr.com |
|
Shanghai JPS Medical Co., Ltd.
Active Member
4 Years
| Sign In | Join Free | My himfr.com |
|
4 Years
| Ask Lasest Price | |
| Brand Name : | |
| Model Number : | |
| Certification : | |
| Price : | |
| Payment Terms : | |
| Supply Ability : | |
| Delivery Time : | |
Compared with standard microporous coverall, the microporous
coverall with adhesive tape are used for high-risk environment such
as Medical practise and low-toxic wastes handling industries.
The adhesive tape covers the stitching seams so that ensure the
coveralls have good air tightness. With hood, elasticated wrists,
waist and ankles. With zipper at the front, with a zipper cover.
Effective protection against dust, harmful particles and low-hazard
liquid splashing. It is suitable for general protection in chemical
plants, wood processing, coal dust protection in power plants,
insulation laying, powder spraying and minor industrial cleaning
operations.
Color: White coverall with blue tape
Material: 50 70 g/m (Polypropylene + Microporous film)
With hood, elasticated wrists, waist and ankles.
Excellent resistance of liquid and chemical splash
Non-sterile or sterilized
Size: M, L, XL, XXL, XXXL
Adhesive tapes covered all seams parts
Zippper closure at the front
Without or with shoe cover
Packing: 1 pc/bag, 50 or 25 bags/carton box (1×50 /1×25)
Other Colors, Sizes or Styles that didn’t show in the above chart
can also be manufactured according to specific requirement.
1. The appearance should meet the following indicators:
colour: The color of the raw materials of each isolation gown is
the same without obvious color difference
Stains: The appearance of the isolation gown should be dry, clean,
free from mildew and stains
deformity: No adhesion, cracks, holes and other defects on the
surface of the isolation garment
Thread end: The surface cannot have any thread longer than 5mm
2. Water resistance: The hydrostatic pressure of key parts should
not be lower than 1.67 KPA (17 cmH2O).
3. Surface moisture resistance: the water level of the outer side
should not be lower than level 3.
4. Breaking strength: The breaking strength of materials at key
parts should not be less than 45N.
5. Elongation at break: The elongation at break of materials at key
parts should not be less than 15%.
6. Elastic band: no gap or broken wire, it can rebound after
stretchi
|
|
